| Standard
WildBlue Roof Mount. |
 |
| WildBlue
Pole Mount. The base of the dish must be at least 5' above
the ground level. The pole must be set a minimum of 3' in
the ground and secured in concrete.
Pole mount instructions. |
 |
| Proper
point of entry through exterior wall. Note that the cable
is dropped down and secured with cable clips. The cable should
drop down to avoid any water from penetrating the point of
entry. The hole is secured with a plastic grommet. |
 |
| Grounding
block. Note proper drip loops on either side of the grounding
block connection. Each cable is identified with green or red
tape at either end. The green identifies the transmit cable
and the red identifies the receive cable. |
 |
| This
photo shows a close-up view of the WildBlue TRIA, the outside
electronic component of your WildBlue system. Notice the cables
are color coded on the end and the loop installation of the
cable. The loop prevents water from dripping into the fittings
and provides extra cabling for future use if needed. |
 |
My Account